A mesh jacket with a detachable membrane, further developed for urban riders in warm conditions.
The Empire 2.0 is further developed for warm riding conditions with a ton of 3D-mesh fabric to ensure enough airflow past your body – impact areas like elbows and shoulders being the exception.
It is fitted with a detachable Raintex ML membrane which is comfortable on the skin as it’s laminated against comfy mesh fabric. This prevents the membrane from sticking to your skin when riding with short sleeves or sleeveless gear underneath.
The membrane is connected through our Easy Cuff™ system; a zip solution that prevents loose, floating layers inside your jacket and your hands from getting stuck when putting your jacket on.
To prevent your jacket from creeping up in case of an incident, we’ve fitted our Belt Loop™; a strong piece of webbing that enables easy connection between your jacket and belt.
At the bottom of the main zip you’ll find our Zip Grip™, a triangular reinforcement that makes inserting and zipping up a lot easier – even with gloves on!
The push buttons at the upper arms require only two fingers to use, making them easy to adjust. Quixnaps™ is what we call these ‘quick-snaps’.
Our RISC™ level 1 impact protectors are present at the shoulders and elbows. RISC™ back and chest protectors are separately available and can easily be placed in the designated compartment. Be sure to check the size table before purchasing a back protector.
Additionally, this jacket is prepared for our MUPBP-1 P.A.L.S. base plate. This accessory can be attached to the lower back of the jacket to enable expansion of luggage capacity. The base plate contains the Pouch Attachment Ladder System that enables our utility bags to be worn on the body.
The Empire 2.0 is what we call riding gear!
| SIZE | PART NO |
|---|---|
| S | 64-1626-49 |
| M | 64-1626-51 |
| L | 64-1626-53 |
| XL | 64-1626-55 |
| 2XL | 64-1626-57 |
| 3XL | 64-1626-59 |
Belt Loop™
SINCE 2008
Wearing jeans on a sports- or naked bike can get a bit chilly when your jacket decides to creep up on you. Being cold is one thing, getting hurt is another. In case of an incident, you might end up on your back without your jacket covering it.
Raise your comfort and safety with our Belt Loop™. It is made of strong webbing that is secured at the top of the back and runs all the way down your jacket, where you can connect it to your belt. The Belt Loop™ keeps your jacket in place, prevents a cold back, and raises your safety in case of an incident.
AIR BURST™
SINCE 2022
Back in the day, you needed to open up your main zip if you wanted to cool down. Luckily, those days are over as our gear has been fitted with ventilation zips, panels and outlets for many years now. But sometimes, all those options still weren’t enough.
That’s why we evolved our mesh fabric to the next level, or actually another dimension all together. The third-dimension mesh fabric of Air Burst™ creates a breathable layer between the body and outside of the shell, which enables a better intake of cool air to cool the body. 3D mesh also slows you down gently and in one piece before your skin comes into contact with the road.
RISC™ chest protector prepared
SINCE 2021
The above goes for all RISC™ protectors with exception of the chest. This unique protector is only available in level 1 and consists of two separate pieces that automatically interlock after placing them in the designated compartments of your MACNA jacket and zipping up.
Easy Cuff™ LITE™
SINCE 2012
Our Easy Cuff™ construction makes getting stuck with your watch or foot a complaint of the past. This zip construction at the cuff keeps the layers fixed and ensures a nice and tidy sleeve. The zip is located at the outside of the cuff, making it easily accessible when needed.
Easy Cuff™ Lite™ is the further developed variant of the unique original construction. It solves the same problem and works just as well, though it looks much, much better than its precursor, as the zip is now located on the inside of the cuff.
P.A.L.S. base plate prepared
SINCE 2023
The utility P.A.L.S. base plate can be fitted onto prepared jackets and enables M.O.L.L.E gear – like the bags below – to be placed in order to expand baggage capacity.
P.A.L.S. Hip bag prepared
SINCE 2023
The MUHB-1 hip bag can be fitted on our utility P.A.L.S. base plate or MUBP backpack in order to increase baggage capacity.
Zip Grip™
SINCE 2015
Zipping up without gloves isn’t always a success at first try. Inserting one part into another turns out to be surprisingly difficult for the most intelligent species on the planet. Some of us even try this sport with their gloves on – with little success in most cases.
Our Zip Grip™ is a triangular reinforcement at the base of the main zip. This reinforcement is easy to get a hold of and provides the needed grip when inserting. Zipping up has just become child’s play, even with gloves on!


































