LEATHER
JACKETS
PANTS
UTILITY
GLOVES
ACCESSORIES
LUGGAGE
E-HEATED
A 3-layer jacket developed for adventurers in all kinds of locations and riding conditions.
Cold riding conditions are just as easily covered by the construction with a detachable Raintex+ membrane and detachable thermal liner as hot riding conditions are by the large ventilation panels on the front, back and arms.
The waist buckle is easy to adjust – even with gloves on – and is connected to the TPU reinforcement on the back. These parts give the back more stability and can be compared to a light version of a kidney belt.
On the lower back you’ll find a large Back Pocket™ in case the other pockets don’t provide enough space, and a Coat Hanger™ – one that can carry the weight of a motorcycle jacket – at the top. Aside from the zip system called Easy Cuff™, the Domane also features Dyna Cuff™, which means it adjusts itself to the length of the wearer’s arm.
The Electric Power Guide™ is a series of loops on the outside of the liner that enables our EPG cable to be run comfortably through the sleeves to power heated gloves straight from your motorcycle.
To top it off we’ve prepared the Domane for extras such as the Vision 2C LED light, which is placed in the designated pocket at the top of the back, and our Vision Tech vest.
Our RISC™ level 1 impact protectors are present at the shoulders and elbows. RISC™ back and chest protectors are separately available and can easily be placed in the designated compartment. Be sure to check the size table before purchasing a back protector.
The Domane is what we call adventurous all-season riding gear!
| SIZE | PART NO |
|---|---|
| S | 64-1377-75 |
| M | 64-1377-77 |
| L | 64-1377-79 |
| XL | 64-1377-81 |
| 2XL | 64-1377-83 |
| 3XL | 64-1377-85 |
Vision Tech vest prepared
This garment is fitted with two buckles at the chest to make sure our Vision Tech vest stays in place and doesn’t interfere.
Back Pocket™
SINCE 2014
Detachable layers are great for the versatility of a motorcycle jacket. Detach or add a layer when the temperature shifts and you’re ready to continue your journey with as much comfort as before. But where do you store these layers? That’s where the Back Pocket™ comes in. This large zip pocket at the lower back is large enough to store detached layers. Other accessories you can’t find a place for can also be stored, as the pocket is fully waterproof.
Coat Hanger™
SINCE 2007
A motorcycle jacket often weighs (a lot) more than a regular jacket. You might notice it when wearing one, and maybe even more when taking it off and carrying it by the ‘Coat Hanger™’ at the neck – which is often just a textile loop that eventually snaps due to the weight of your motorcycle jacket.
Our Coat Hanger™ is specifically designed to carry the weight of your motorcycle jacket. This strong and durable handle is found at the neck, though we chose to place it on the outside to enable the jacket to dry and air better when stored on, for example, a coat rack.
Electric Power Guide™
Our Electric Power Guide™ (EPG) is a series of loops at the arms and shoulders of the thermal liner.
These loops enable you to run power cables through the sleeves with full freedom of movement and no bulk at the wrists.
DYNA CUFF™
SINCE 2018
Chances are likely that your arms are shorter or longer than ours. Truth is, no two bodies are the same. For some riders, finding a suitable jacket is an event they can hardly look forward to. Most jackets are either too long or too short, or they fit well but the sleeves are simply too long.
Dyna Cuff™ is a softer, more dynamic cuff that enables the sleeve to retract and adjust itself to the length of the wearer’s arm. This solution is particularly great for riders who have short arms in relation to their bodies.
Easy Cuff™
SINCE 2009
Loops and snaps that are supposed to neatly connect the separate layers of a jacket or pants. We all know how well that works; it doesn’t. Chances of your watch or foot getting stuck are ten times higher than of you actually putting on the garment without issues.
Make this issue a complaint of the past with our Easy Cuff™, a zip construction at the cuff that keeps the layers fixed and ensures a nice and tidy sleeve. The zip is located at the outside of the cuff, making it easily accessible when needed.
Night Eye™
SINCE 2010
If jackets could have a split personality, they would probably look like this. Common grey by day, incredibly luminous at night: when placed in the range of a car’s headlights, it’ll light up completely!
RISC™ chest protector prepared
SINCE 2021
The above goes for all RISC™ protectors with exception of the chest. This unique protector is only available in level 1 and consists of two separate pieces that automatically interlock after placing them in the designated compartments of your MACNA jacket and zipping up.
RAINTEX PLUS™
SINCE 1992
Our gear can be fitted with a waterproof Raintex Plus membrane that prevents rainwater from penetrating whilst enabling vapor drops to make their way through. These membranes keep you free from both sweat and rainwater, and are more flexible than a regular Raintex membrane to increase comfort.
Raintex Plus membranes are incorporated into our waterproof garments in different ways. Some feature a fixed membrane and others are fitted with a detachable one. There are also jackets with a waterproof liner, which means the waterproof membrane and thermal liner are combined to create a single layer.
